Not Your Grandma's Fireplace

January 2013

After I made the big jump to paint the brick it was a smooth sailing to completion.  The fireplace surround that started this entire project was finally ready to be installed. For those who are interested, the surround is made by Pleasant Hearth and my mom purchased it on Amazon where it shipped free.  It has a craftsman feel to it and the arch top doors reminded me of our own hobbit door not so far away. There are several other designs that seem to work well for older style homes.

The install of the piece was really easy.  It pretty much has six toggle bolts that you tighten into the sides and top of your fireplace opening.  No seriously, that was it. According to the directions it might have been more complicated if our opening was taller, or if we lacked a metal brick ledge.  But for once, in the history of the house, we appeared to have something 'typical.' Once, it came out of the box it took only a few moments to unpack, install the provided insulation into the back and read the instructions. Just because I like to make double sure of things I decided to go online and read up a bit.  Most reviewers were positive, a few mentioned it you were using this to act as a damper you probably needed to add some additional sealing and insulation.   I went ahead and purchased the other items they recommended. 

Josh cleaned the interior of the brick opening (Gus of course had to help).  He then applied a sticky back insulation roll, roughly about 2" thick around three sides of the opening.  This is supposed to help with the inevitable air gap where the surround meets the brick.  Sorry for the lack of pictures but since it was a two man job we were lacking apposable thumbs.  The next step after the surround installed was to use heat resistant silicone to fill in all the gaps around the top and edges where our surround sat flush to the brick but left openings where the indented mortar lines were. 

This was honestly the worst part, I hate silicone.  Its not easy to work with, it sticks to everything, and it doesn't wipe off you or other objects with water.  Once every mortar hole was filled with silicone we installed the door handles.  Finally, I got my decorating cap back on and put back all my fireplace chitz.

The run down is this.  Three weeks of work, one new surround, one gallon of masonry primer, reused stain, paint, and poly.  It cost roughly $300 and made a huge difference to our little family room.

Before 2010:

2012:

2013:

Sunny Hallway

February 2012

Hallway part two!  After we let the plaster dry I went ahead and primed the entire room.  This proved to be one smelly situation since our primer decided it was old and was going to be stinky.  It quickly became one very small and very smelly room. It seems painting in the middle of the winter with no exterior windows allows odors to linger for a long time (who knew?). Can you say fumes? After going back and forth about colors and painting 12 samples on the wall we decided to go with a creamy gold color for the hallway. Since the room is so small and all the surrounding rooms had such vibrant colors we thought this was the warmest way to transition between spaces. We went with Benjamin Moore Concord Ivory.  Which is not ivory for the record but more of a butter color. 

I bought a color-matched gallon of Miller Acrinamel Satin and pulled out my trusty Bone White Acrinamel Semi-Gloss for the trim and ceiling and went to town.  By went to town I mean I hand painted the entire space.  It was slow going.  There was a lot of cutting in since there were so many doors.  There was virtually no space to roll anything.  Also, the room is 9 feet tall so I couldn't use a step stool,  I had to move my 8 foot ladder up and down the hallway as needed. But three coats of Ivory and two coats of bonewhite on the doors and trim and I felt like I had a whole new space.

At the same time, I stripped the hardware for the closet door (which someone had slopped paint all over) I also ordered a vintage inspired light on Etsy and picked a clear glass shade to allow as much light as possible. Smaller changes included adding oil-rub bronze light switch covers, painting the thermostat bone white (a huge bonus since it was a gross 1970's gold color) and getting some frames for all of our national park posters.

The end result was light and bright and a huge difference from the blink and you missed it dirty white hallway.  Part of me wishes the color was a little more orange and went with the rug a little better but I didn't want to sacrifice the brightness for matchy matchy requirements. All in all, I was pretty happy with the space.

Just as a reminder: Before 2010

After 2012

A round up:  plaster repairs $200, Concord Ivory wall paint $43.00, Bone White trim/ceiling paint $0 (because we bought it a year ago), vintage inspired Etsy light $75.00,  oil rub bronze switch cover $8.00, Michael's black frames for three posters- $60.00, and Pottery Barn sale runner $75.00.  That's a whole new space for under $500.00! Although when you realize the space is about 8 square feet it may not work out to such a great deal.